TEK208 RZR Ram Mount S1 with 1″ Ram Ball
AVAILABLE STOCK LIKELY, MANUFACTURER DIRECT (POSSIBLY MADE TO ORDER)
TEK208 RZR Ram Mount S1 takes the rattle out of your passenger grab handle while providing you a Ram Mount ball to mount your tablet, phone or GPS. The S1 model fits on Polaris RZR with a square OD grab handle receiver and a square grab handle bar. Use S1E model on S model RZR, It requires the .75″ longer ball to clear dash. Convenient location for your tablet, phone or GPS device for navigation and controlling your music. Machined from 6061-T6 aluminum then anodized with a matte black finish.
To install remove your passenger handle and slide the TEK208 RZR Ram Mount over the receiver stub. Reinstall grab handle in desired position sliding pin through RZR Ram mount, receiver and grab handle. Use allen wrench to tighten screw on mount to lock mount to receiver stub. Passenger grab handle can still be easily adjusted by pulling pin with out loosening screw. Tighten knob on mount to take rattle out of handle.
You will need a tablet, phone or GPS holder for your favorite GPS or music device such as one from Ram, Griffin or Otterbox that has provisions for attach a 1″ram ball on its back. Here is a link to what Ram™ offers https://www.rammount.com/device
A ball such as this for back of cradle https://www.rammount.com/part/RAM-B-238U 2 hole style or https://www.rammount.com/part/RAM-B-347U 4 hole style is need for back of holder.
The Ram standard length double socket arm, https://www.rammount.com/part/RAM-B-201U-C Socket-To-Socket Length: 5.1875″ seem to work best to join everything together for most situations. or for a little shorter set up https://www.rammount.com/part/RAM-B-201U Socket-To-Socket Length: 3″
Join it all together, mount up your GPS and/or Music device and your ready to explore new country, get farther in to the woods without worrying about getting lost or running out of tunes.
The S1 model fits on Polaris RZR with a square OD grab handle receiver and a square grab handle bar. Use S1E model on S model RZR, It requires the .75″ longer ball to clear dash.
TEK208 RZR Ram Mount only. Holder, arm or holder ball not included but needed for complete assembly.